Bilkent University Quality Management in Education

Bachelor of Science in Mechanical Engineering

Foundation

2009

Qualification Awarded

Bachelor of Science in Mechanical Engineering

Level of Qualification

First Cycle Degree

Mode of Study

Full Time

Admission & Registration Requirements

To begin undergraduate studies at Bilkent, all Turkish citizens must take the entrance examinations YKS, administered by the national Student Selection and Placement Center (ÖSYM). Based on the results of this exam, ÖSYM places students according to their preferences.
All international students who want to apply to Bilkent University for an undergraduate program have to go through an admission procedure. Various national exams and diplomas are used in evaluating the candidates.
In absence of these documents, the high school graduation score can also be evaluated for admission. The high school diploma and transcript along with an explanation of the high school's grading system will be needed.
English is the language of teaching at Bilkent University. Applicants are required to provide proof of their proficiency in English. Students whose level of English is insufficient to follow courses are required to enroll in the School of English Language.

Assessment of Student Performance

Apart from work conducted throughout the semester, students are usually asked to take a final examination and at least one midterm examination for a course. If a staff member considers it appropriate, practical laboratory work or other such assignments may be assessed as midterm examinations or as a final examination.

Grades are finalized when they are announced via the internet on the date specified in the Academic Calendar. Semester grades for practical studies and other non-lecture courses are determined by an evaluation of the student's overall work and performance throughout the semester.

Bilkent University's official grading system uses letter grades with pluses and minuses. Passing grades range from A+ to D; F, FX is failing. The quality-point equivalents of the grades are:

  A+   4.00   B+   3.30   C+   2.30   D+   1.30   F   0.00
  A   4.00   B   3.00   C   2.00   D   1.00   FX   0.00
  A-   3.70   B-   2.70   C-   1.70           FZ   0.00

Other grades used are S (Satisfactory), U (Unsatisfactory), I (Incomplete), P (In Progress), T (Transfer), and W (Withdraw). These grades do not have quality-point equivalents.

S : accorded to students who are successful in non-credit courses.
     
U : accorded to students who are unsuccessful in non-credit courses.
     
I : accorded to students who, although otherwise successful, have failed to complete the required assignments for a course due to illness or some other valid reason. Proof of illness or other reason for non-completion must be submitted to the department chair within three days of the date of the final exam. A student receiving an incomplete grade for any course must make up for the deficiencies within 15 days after the final exam in order to obtain a grade. Otherwise, the grade I automatically becomes FX. At the discretion of the department chair, the period specified above may be extended until the beginning of the following semester.
     
P : progress.
     
T : reflects approved transferred courses from other universities or from an exchange program. A student with a grade of T is exempted from an equivalent number of credits on the condition that the courses are accepted by the department on the recommendation of the department chair and with the approval of the board of the faculty/school. This grade may provide an exemption for a particular course at the program.
     
W : student has withdrawn from the course before the end of the semester.

A student with extraordinary performance in a course may be granted an A+ grade. However, the number of A+ grades in a given course is limited based on class size: If the class size is less than 25 students, no A+ grades may be given; if the class size is between 25 and 74 students, only one A+ grade may be given; if the class size is between 75 and 124 students, two A+ grades may be given; if the class size is between 125 and 174 students, three A+ grades may be given; if the class size is between 175 and 225 students, four A+ grades may be given; if the class size is more than 225 students, five A+ grades may be given. (The letter grade A+ was instituted beginning with the 2010-2011 academic year.)

An undergraduate student who receives a grade of C or higher in a course (or S in a non-credit course) is considered to have satisfactorily completed that course.

A student who receives a grade of C-, D+, or D in a course can only be considered to have completed that course if his/her Cumulative Grade Point Average (CGPA) is 2.00 or higher.

A student receiving either F, FX, FZ, or U in a course is considered to be unsuccessful in that course. Students who have failed a course in the curriculum program must repeat the course within the following two semesters. Those who fail first year English courses must repeat these courses the very next semester they are offered. The university may register a student to these courses and not allow for a course to be dropped. Students on probation who received C-, D+ or D grades in previous semesters may repeat any of these courses.

In addition to taking the required courses in a given semester, students with "Satisfactory" standing may also repeat courses taken in the previous two semesters for which they received a B-, C+, C, C-, D+ or D grade, provided there is room in the section. Registration to these courses takes place on the dates as announced by the Rectorate.

On condition that at least one course of all curriculum requirements of an elective set has already been taken, an elective course from this elective set can be taken in place of courses taken before for this elective requirement. In this case, the previously taken elective course will appear in the transcript but will not be included in the CPA calculation. Once established, such course matching cannot be changed. The previously taken elective course can be repeated to fulfill another curriculum requirement.

A student's academic performance is determined at the end of each semester by computing an average of the grades he/she has received during that semester. For each course, the grade point equivalent of the letter grade received by the student is multiplied by the credit units for that course; the sum of these products is then divided by the total credit units taken in that semester to yield the Grade Point Average (GPA) for that semester. The Cumulative Grade Point Average (CGPA) is calculated by multiplying the grade point equivalent of the letter grade by the credit units for each course and then dividing the total sum by the total credit units taken in the program.

National Degree Qualifications

Basic Field Qualifications for Engineering (Academic - Weighted) - 6th Level - Bachelor's
NQF-HETR
LEVEL
KNOWLEDGE
- Theoretical
- Conceptual
SKILLS
- Cognitive
- Practical
COMPETENCES
Competence to Work
Independently and
Take Responsibility
Learning Competence Communication and Social
Competence
Field Specific Competence
6th Level Bachelor's

EQF-LLL:
6th Level

QF-EHEA:
1st Cycle
Qualifications that signify completion of the sixth cycle are awarded to students who
K1. Have sufficient background in mathematics, sciences and their own field of study.
S1. Make use of theoretical and practical knowledge on mathematics, sciences and their own field concurrently for engineering solutions.
S2. Identify, define, formulate and solve engineering problems; select and apply analytical methods and modeling techniques appropriate for this purpose.
S3. Analyze a system, a system component or a process; make a design in consideration of realistic constraints in order to meet the needs expected; and apply modern design methods.
S4. Select and use modern techniques and devices required for engineering applications.
S5. Design and conduct experiments, collect data, analyze and interpret results.
W1. Assume active responsibility in individual work or multi-disciplinary team work.
W2. Accesses information and makes source research for this purpose, uses databases and other information sources.
L1. Know how to access information and do literature survey; and make use of databases and other information resources.
L2. Be aware of the need for lifelong learning; keep up with the developments in science and technology and renew themselves continuously.
L3. Make use of theoretical and practical knowledge on mathematics, sciences and their own field concurrently for engineering solutions.
L4. Identify, define, formulate and solve engineering problems; select and apply analytical methods and modeling techniques appropriate for this purpose.
L5. Analyze a system, a system component or a process; make a design in consideration of realistic constraints in order to meet the needs expected; and apply modern design methods.
L6. Select and use modern techniques and devices required for engineering applications.
L7. Assume active responsibility in individual work or multi-disciplinary team work.
C1. Uses information and communication technologies together with computer software required by the field at least Advanced Level of European Computer Driving License.
C2. Communicate in oral and written form in a foreign language at minimum B1 level, as defined by the European Language Portfolio.
C3. Communicates using technical drawing.
C4. Accesses information and makes source research for this purpose, uses databases and other information sources.
C5. Becomes aware of the universal and social effects of engineering solutions and applications; become aware of entrepreneurship and innovation and have knowledge about the problems of the age.
F1. Have sense of professional and ethical responsibility.
F2. Have consciousness about project management, workplace practices, workers’ health, environmental risk evaluation, environmental and work safety; and have awareness about legal consequences of engineering applications.
F3. Becomes aware of the universal and social effects of engineering solutions and applications; become aware of entrepreneurship and innovation and have knowledge about the problems of the age.

Education Objectives

The objectives of the Mechanical Engineering undergraduate program at Bilkent University are: 1. To prepare students for their individual career paths and to foster the ability to adapt to the rapidly changing technologies faced by engineers. 2. To assist the students to distinguish themselves as innovative problem solvers and leaders in multidisciplinary settings, through a high quality and rigorous mechanical engineering education that is enriched by a flexible curriculum and interdisciplinary research opportunities. 3. To provide the students opportunities to pursue directions of personal interest, design and teamwork experiences, and to have significant hands-on experience

Program Outcomes

    Program Outcomes/Degree Qualification Matrix

     Program Outcomes
    Qualification
    K1
    S1
    S2
    S3
    S4
    S5
    W1
    W2
    L1
    L2
    L3
    L4
    L5
    L6
    L7
    C1
    C2
    C3
    C4
    C5
    F1
    F2
    F3

    Program Curriculum

    First Year
    Autumn Semester
    Course Code Course Name Hours Credits Prerequisite Options
    Lecture Lab/Studio
    /Others
    Bilkent ECTS
    ENG 101 English and Composition I 5 0 3 5
    GE 100 Orientation 0 0 1 2
    MATH 101 Calculus I 4 0 4 6,5
    ME 101 Fundamentals of Mechanical Engineering 2 2 2 3,5
    PHYS 101 General Physics I 3 3 4 6,5
    TURK 101 Turkish I 0 0 2 3,5
     
    Spring Semester
    Course Code Course Name Hours Credits Prerequisite Options
    Lecture Lab/Studio
    /Others
    Bilkent ECTS
    ENG 102 English and Composition II 5 0 3 5 ELS 101 or ENG 101 or ENG 103
    MATH 102 Calculus II 4 0 4 6,5 MATH 101 or MATH 106
    ME 102 Introduction to Systems Engineering 2 2 3 5
    PHYS 102 General Physics II 3 3 4 6,5 MATH 101 or MATH 111 or MATH 113 or PHYS 101 or PHYS 111
    TURK 102 Turkish II 0 0 2 3,5
    Second Year
     
    Autumn Semester
    Course Code Course Name Hours Credits Prerequisite Options
    Lecture Lab/Studio
    /Others
    Bilkent ECTS
    CS 115 Introduction to Programming in Python 3 4 4 6,5
    GE 250 Collegiate Activities Program I 0 0 0 1
    HUM 111 Cultures Civilizations and Ideas I 3 0 3 5 ENG 101
    MATH 220 Linear Algebra 3 0 3 5
    ME 211 Thermo-Fluids Engineering I 4 2 4 6,5 MATH 101 and ME 101 and PHYS 101
    ME 231 Mechanics and Materials I 4 2 4 6,5 MATH 101 and ME 101 and PHYS 101
     
    Spring Semester
    Course Code Course Name Hours Credits Prerequisite Options
    Lecture Lab/Studio
    /Others
    Bilkent ECTS
    GE 251 Collegiate Activities Program II 0 0 1 2 GE 250
    HUM 112 Cultures Civilizations and Ideas II 3 0 3 5 HUM 111 or HUM 121
    MATH 240 Differential Equations 3 0 3 5 MATH 102
    ME 212 Thermo-Fluids Engineering II 4 2 4 6,5 MATH 102 and ME 211
    ME 232 Mechanics and Materials II 4 2 4 6,5 MATH 102 and ME 231
    Third Year
     
    Autumn Semester
    Course Code Course Name Hours Credits Prerequisite Options
    Lecture Lab/Studio
    /Others
    Bilkent ECTS
    CHEM 201 Materials Science and Technology 3 0 3 5
    ENG 401 Technical Report Writing and Presentation 3 0 3 5 ENG 102 or ENG 104
    MATH 230 Probability and Statistics for Engineers 3 0 3 5 MATH 102
    ME 299 Summer Practice I 0 0 0 7 ME 211 and ME 231
    ME 341 Dynamics and Control I 4 0 4 6,5 (MATH 240 and ME 231) or (MATH 242 and ME 231)
    ME 371 Measurement and Instrumentation 2 2 3 5 PHYS 102 and (MATH 225 or MATH 240 or MATH 242)
    ME Elective 3
     
    Spring Semester
    Course Code Course Name Hours Credits Prerequisite Options
    Lecture Lab/Studio
    /Others
    Bilkent ECTS
    HIST 200 History of Turkey 3 0 4 6,5
    MBG 110 Introduction to Modern Biology 3 0 3 5
    ME 342 Dynamics and Control II 4 0 4 6,5 (ME 341 and MATH 220) or (ME 341 and MATH 241)
    ME 381 Design and Manufacturing 3 0 3 5 CHEM 201 and ME 102 and ME 232
    ME 384 Mechatronic Systems 3 0 3 5 ME 371 and ME 341 and (CS 114 or CS 115)
    Fourth Year
     
    Autumn Semester
    Course Code Course Name Hours Credits Prerequisite Options
    Lecture Lab/Studio
    /Others
    Bilkent ECTS
    GE 301 Science Technology and Society 2 0 2 3,5
    ME 399 Summer Practice II 0 0 0 7 ME 212 and ME 342 and ME 371 and ME 381
    Arts Core Elective 3
    Engineering Elective 3
    ME Elective (2) 6
    Project Elective I 3
     
    Spring Semester
    Course Code Course Name Hours Credits Prerequisite Options
    Lecture Lab/Studio
    /Others
    Bilkent ECTS
    Elective 3
    Mathematics/Science Elective 3
    ME Breadth Elective 3
    ME Elective 3
    Project Elective II 3
    Social Science Core Elective 3


    Elective Courses in the Curriculum

    Elective Count Program Outcomes Options
    Arts Core Elective 1  
    Elective 1  
    Engineering Elective 1  
    Mathematics/Science Elective 1  
    ME Breadth Elective 1  
    ME Elective 4  
    Project Elective I 1  
    Project Elective II 1  
    Social Science Core Elective 1